The quality recording of an acoustic guitar is a very challenging task and for that, you need a proper guide on how to record a guitar to add a mesmerizing sound to your music.
This is a little bit extensive guide for you, so you can have the best way to record acoustic guitar and vocals and also include some tips and tricks that can help you a lot.
Basic Tips to Keep in Mind
Finding The Right Space
Before you begin setting your things, it’s essential to remember that when you record, it will be influenced by the shape and sound of the room so picking the correct spot is extremely significant.
Note that, recording in a live with bunches of furniture (a room) will give you a more tight sounding chronicle because of the furniture retaining the sound made from the guitar.
Picking the Right Guitar
You can purchase a guitar for two or three hundred dollars, or a few thousand dollars. Most likely, an increasingly costly guitar is going to sound “better,” isn’t that what everyone thinks?
Guitars’ costs depend on different factors, for example, the materials a guitar is made of, the producer, and other data that we may never be conscious of knowing.
Every guitar creates a one of a kind tone, which means increasingly costly guitars aren’t in every case better; simply extraordinary.
Knowing Your Microphones – Condenser Vs Dynamic
Before you set up you have to choose which amplifiers you are going to utilize. As acoustic guitars are fragile instruments and frequently contain a great deal of high recurrence data, the most widely recognized decision is a mix of condenser receivers.
Finding a proper mic position is very straightforward. You’ll require a couple of earphones for this procedure since you’ll be observing your information signal through them.
In the first place, select the kind of receiver position procedure you’d prefer to utilize: mono, X-Y, divided pair, wide dispersed pair, or mid-side.
When you’ve done this, put your earphones on and move the microphone(s) around your guitarist until you discover a place that catches the tone you’re searching for.
In any case, the main thing is that you have a general feeling of what sort of character each segment of the guitar will create. This will let you focus on the piece of the guitar that creates the tone you’re after and zone in on a receiver situation that fits the requirements of your melody.
The four primary areas of a guitar that you should worry about while recording are the fingerboard, the territory where the body meets the neck (around the twelfth fret), the sound opening, and the body of the guitar.
Pointing your mic at the fingerboard is going to get a great deal of very good quality frequencies, and string commotion brought about by the guitarist’s fingers sliding around.
Polar Pattern For Acoustic Guitar
All the mics have a one of a kind pattern that directs it’s physical range which is fit for recording sound. For instance, a mic that has a cardioid polar will record sound before the gadget yet dismisses the greater part of the sound behind it.
Other patterns incorporate omnidirectional, subcardioid, super-cardioid, hyper-cardioid, bi-directional, and shotgun. Utilizing a mic with a fitting polar for the job needing to be done is significant for improving sound quality.
Techniques on Recording Acoustic Guitar With One Mic
We should begin with the three most basic strategies:
This strategy depicted is likely the most usually utilized: A condenser mic put where the body meets the neck (twelfth or fourteenth fret, contingent upon the guitar), around 8-12 inches away. We’ll call this position “A”.
This is a sweet spot where a significant number of the components that involve the sound of the guitar are available: The strings, neck, soundboard, sound-opening, pick/right-hand, etc. In like manner, little varieties in the point of the mic permit you to change the harmony between every one of these components.
By and large, pointing the mic towards the sound opening will get somewhat more body and pick sound, while pointing it towards the neck will give all the more string sound and left-hand fingerboard detail.
This position gives a decent, adjusted sound that functions admirably in occupied game plans where the acoustic guitar must coexist with a decent number of different instruments.
The extra favorable position of having a variable apparent palette simply changing the edge of the mic a little is consistently welcome.
The following situation that is utilized, is our position “B”, which is valuable when an increasingly adjusted and full-bodied tone is required.
In this methodology, the mic is set before the guitar, above or underneath the sound opening to maintain a strategic distance from its solid reverberation. This position offers more body and somewhat less right-hand-against-strings sound.
This procedure is likewise helpful in numerous applications, and is frequently preferred for accounts where the course of action is increasingly scanty, or the acoustic guitar requests more unmistakable quality or “size”.
In position “C”, the mic is set close to the scaffold of the guitar, pointing towards the zone between the extension and the sound gap.
This position catches considerably less string and finger commotion from the neck and can wind up highlighting the sound of the pick against the strings, contingent upon the calculating of the mic.
Recording Acoustic Guitar With 2 Mics
On the off chance that the guitar is to be highlighted noticeably in your last blend, you might need to record in surround sound, utilizing two mics.
One normal arrangement, known as X/Y, utilizes two mics put with the goal that the vessels areas near one another as could be expected under the circumstances, and calculated at 90 degrees.
For X/Y miking you can attempt similar areas, we talked about for mono. There are mic holders planned explicitly for X/Y that permit you to put both mics on one stand, which takes into account simpler situating.
You can have a progressively extensive sound with an approach which we are about to read. There are numerous varieties to this methodology, yet what we can do is to put one mic at the neck joins the body and the other mic close to the lower session behind the scaffold.
There are numerous other designs of mic that you can follow, yet barely any immovable standards, so don’t be reluctant to analyze.
What To Do When You Get A New Acoustic Guitar
Check for Cracks
Investigate your whole guitar for splits in the completion of the wood, or an extension that has isolated from the body.
Take a stab at pushing a bit of paper under the scaffold. On the off chance that it goes in more than around 1/8 inch, the scaffold ought to most likely be re-glued.
If you discover whatever seems as though it should be stuck or a noteworthy fix, take your guitar to an expert repair person.
Fix Loose Parts
Utilize an appropriate size screwdriver to fix the screws used to mount your tie button, bracket bar spread, preamp, and tuning machines.
On most present-day steel-string tuners, this may incorporate fixing the bushing that goes over the string post with a container wrench.
Give the guitar a decent shake and tune in for clatters. If your guitar has a pickup, there may be free wires inside the body. Secure them with little self-glue link clasps.
Clean the Guitar
When you’ve discovered that your guitar is stable, give it a decent cleaning. The most ideal approach to begin is by removing all the strings with the goal that you have simple access to the whole top and fretboard.
Nonetheless, if your guitar has an undersaddle pickup, you ought to presumably avoid this progression or simply evacuate half of the strings one after another. This will keep up string pressure on the seat, guaranteeing that the pickup’s yield balance isn’t undermined.
Adjust Action On Acoustic Guitar
Adjust Action On Acoustic Guitar can be something other than turning an Allen wrench. Contingent upon what’s up with your guitar you may need to modify it in a couple of various ways.
By and large, the reason or your high or low activity on your acoustic guitar can be fixed with a straightforward bracket bar alteration. For whatever length of time that you didn’t drop your guitar or plan something to harm the neck or nut, the action change ought to be genuinely straightforward.
Your activity alteration additionally relies upon what sort of guitar you have and the equipment on the guitar.
By and large, there are three stages the setting the action on your acoustic guitar. Try not to be tricked by some sales rep at Guitar Center; to alter the activity on your electric guitar, you have to check and perhaps modify three unique zones: support pole, nut, and scaffold.
Your acoustic may play alright after you modify the support pole, however, it most likely won’t play as well as could be expected under the circumstances if you set the action in every one of the three of these regions. These alterations must be done in a specific order since one change will influence modifications done after it.
Best Acoustic Guitar For Recording
There are many options for acoustic guitars for recording in the market today, but the 5 that stood out from the rest are:
- Taylor 224ce-K DLX Koa Deluxe Grand Auditorium
- Yamaha L-Series LS16M
- Fender FA-235E
- Taylor GS Mini-e Walnut/Spruce
- Yamaha A3M Cutaway
- Ovation AX Series 2078AX-5
The above article covers all the aspects that you need to know before the quality recording of acoustic guitars whether you are a beginner or a pro.